The MTK10 is an Apprentice Test Kit which includes a clamp meter, an insulation tester, an ELCB tester, a non-contact detector and a continuity & bell tester in a heavy duty meter case.
Apprentice Test Kit Includes :
- MT723 – 400A AC/DC Clamp Meter
- CAT III 600V and CAT II 1000V
- 4000 count backlit LCD display
- AC and DC Voltage 600V
- AC and DC Current 400A
- Resistance 40Mꭥ
- Frequency 10kHz
- Capacitance 100µF
- Temperature -20 to 760˚C
- Duty Cycle 99%
- Ø30mm Cable Clamp size
- INRUSH Current Measurements
- VFD – Variable Frequency Drive voltage value
- NCV – Non-Contact Voltage Detector
- Built-In Flashlight
- Continuity buzzer and Diode Test
- Peak Mode and Data Hold function
- Auto Power Off
- MT500 – Analogue Insulation Tester
- CAT IV 600V and CAT III 1000V
- 3 test ranges 250V-500V-1000V
- AC Voltage 600V
- Resistance 500ꭥ
- Live Circuit warning and buzzer
- Data Hold function
- 1mA output current on insulation test
- 200mA short circuit on continuity range
- Automatic discharge after test
- Front panel zero adjustment for test lead resistance
- Lock down Test Button for continuous use
- Hands free strap and magnet supplied as standard accessories
- Rubber overmould housing
- Illuminated display
- MT310 – ELCB Tester
- CAT IV 300V and CAT III 600V
- Compact, lightweight and easy to use
- AC Voltage Measurement 245V
- Frequency Response 60Hz
- Test Current 35mA
- Correct Wiring Indication with neon lights
- Operates on 230V systems
- AC Voltage measurement on LCD display
- Fixed current settings from 10mA to 35mA
- Separate test button
- Double injection rubber housing
- MT403 – IP67 1000V NCV Detector
- IEC61010-1 CAT IV 1000V
- IP67 waterproof and dust proof
- AC Voltage 1000V
- Frequency 60Hz
- Thinner probe tip for working with socket outlets
- Green LED means Power on, flashing red LED with beeper means Voltage detected
- Two modes, green indicates high voltage mode, Yellow LED 12V Mode
- Flash and beep rate increases as the detector gets closer to the voltage.
- Power On/Off with silent mode
- 2m drop-proof
- MT100 – Continuity and Bell Tester
- Remotely identify and label two wires using flashing remote probes
- Distance 3000m (26 Gauge min)
- Lightweight and pocket size
- MTKBAG – Heavy Duty Meter Case
- Optional carrying case to house a range of meters the user needs to carry at any one time
- Specially designed by Major Tech to be compact with a shoulder strap
- Adjustable compartments for bigger instruments or tools
- Pocket for instruction manuals or documentation
- Size – 220mm (H) x 450mm (W) x 200mm (D)
Follow us on Facebook and Instagram to keep updated with the latest products and promotions.
