SKU: MT915

2-in-1 Cable Finder and Multimeter

$205.00 ex. GST
$225.50 inc. GST

  • CAT III 600V and CAT II 1000V
  • AC and DC Voltage 600V
  • AC and DC Current 200mA
  • Resistance 20Mꭥ
  • Diode Check and Continuity
  • Identifies up to 16 cables
  • Cuts out “Bell-Out” time
  • Transmitter and Receiver included
  • Displays the cable number on the large LED display

The MT915 2-in-1 Cable Finder and Multimeter is an amazing tracing system which will save hours instead of Belling-Out any circuit. The MT915 consists of a transmitter & receiver device which enables one person to instantly match up ends of individual cores at either end of a multi-core cable. With the remote kit the meter can test cables installed over long distances either on wall plates or patch panels.

This Cable Finder and Multimeter ensures that the digital multimeter function makes it easy to measure AC Volts, DC Volts, AC and DC Current, Resistance, Continuity and Diode Test.

SKU: MT915 Categories: ,


Function Range Resolution Accuracy
DC Voltage 200mV – 600V 0.1mV ±(1.0% + 3 Digits)
AC Voltage 200mV – 600V 1mV ±(1.0% + 5 Digits)
DC Current 200.0μ A – 200.0mA 0.1μA ±(1.5% + 3 Digits)
AC Current 200.0μ A – 200.0mA 0.1μA ±(1.8% + 8 Digits)
Resistance 200.0Ω – 20MΩ 0.1Ω ±(1.2% + 3 Digits)
Overrange Indication Yes
Input Impedance >7.5MΩ VDC & >7.5MΩ VAC
Continuity Yes
Diode Test Yes
Cable Finder 16 channels; 30KΩ 1.8mA
Ac Bandwidth 50Hz – 60Hz
Digital Display 2000
Min Max Yes
Back Light Yes
Enclosure Rubber Holster
Batteries 2 x AAA and 9V
Weight 308g
Dimensions 162 x 74 x 43mm
Safety Specs IEC61010-1 CAT III 600V

Safety Ratings



9V Battery
2 x AAA Batteries
Instruction Manual