Cable & Circuit Testers
Showing all 9 results
-
Cable & Circuit Testers
Cable Length Meter
- 20 000 count backlit LCD display
- Measure up to 30 000m
- Resistance from 1999.9mΩ to 1999.9Ω
- Temperature -5˚C to 50˚C
- 20 Standard Cable Types
- 20 pre-set wire gauge settings 0.15mm² to 240mm²
- 8 memory locations in user select mode
- Automatic temperature compensation
- Measures Aluminium (Al) and Copper (Cu) cables and wire
- Measures and indicates Temperature
- User Calibration mode
- Measures in meters (m) and feet (ft)
- Kelvin clip test leads included
- Built-in buzzer
- Auto Power Off
SKU: MT933A -
Cable & Circuit Testers
VDV Wire Tester
- Analysing of Voice, Data and Video cables
- Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables.
- Detects shorts, opens, reversed polarity, crossed and split pairs
- 5 Data RJ45 Remote Identifiers, 5 Coax F-Connector Remote Identifiers
- Generates three distinct, selectable digital tone patterns for cable tracing and trouble shooting
- Flashing Voltage warning alerts user of unidentified hazardous voltage
- Simple cable identification of patch panel or wall outlet port
- Low Battery indication and Auto Power Off
- PASS or FAIL indication of correct or error in wiring
- Large LCD backlit display
SKU: MT902 -
Cable & Circuit Testers, Multimeters
2-In-1 LAN Tester and Multimeter
- CAT III 300V and CAT II 600V
- 2-in-1 LAN Tester and Digital Multimeter
- AC and DC Voltage 600V
- AC and DC Current 200mA
- Resistance 20Mꭥ
- LED displays the actual pin configuration and tests the correct pin configuration of 100Base-T, 10Base-T, 10Base-2 Thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable etc
- With remote kit it can remotely test cables up to 300m away either on wall plate or patch panel
- Can test the grounding
- Provides easy to read continuity and fault status display
- Locked Status wiring function
- LAN Testing
- Tests CAT 5 Installations
SKU: MTC50 -
Cable & Circuit Testers, Multimeters
2-In-1 Tone and Probe Generator & Multimeter
- CATIII 300V and CAT II 600V
- AC and DC Voltage 600V
- AC and DC Current 200mA
- Resistance 20Mꭥ
- Tests include wire trace, continuity test, clear/busy/ringing line test and tip/ring identification
- Alligator clips for non-terminated cables and modular connectors for direct connections to telephone or internet wiring
- Built-in speaker on probe with sensitivity control
- Selectable continuous or variable tone generation
- Insulated inductive probe tip prevents shorting conductors
- Diode Test and Continuity
- RJ11 Modular Connectors
SKU: MTC45 -
Cable & Circuit Testers
Tone and Probe Generator
- RJ11 modular connectors
- Tracing Telephone, Cable and Wire
- Tone and Probe Tester Cable and Wire, RJ11
- Built-in speaker on probe with sensitivity control
- Traces & identifies wires / cables in a bundle or group
- Insulated inductive probe tip prevents shorting conductors
- Tests include wire trace / continuity test clear / busy / ringing line test and tip/ring identification
SKU: MTC40 -
Cable & Circuit Testers, Multimeters
2-in-1 Cable Finder and Multimeter
- CAT III 600V and CAT II 1000V
- AC and DC Voltage 600V
- AC and DC Current 200mA
- Resistance 20Mꭥ
- Diode Check and Continuity
- Identifies up to 16 cables
- Cuts out “Bell-Out” time
- Transmitter and Receiver included
- Displays the cable number on the large LED display
SKU: MT915 -
Cable & Circuit Testers
TDR Cable Length Meter
- Measures copper cable up to 3.0km
- 20 Standard Cables Library
- 99 Internal memory locations store up to 99 traces for future analysis
- Measures V.O.P (Velocity Of Propagation) of a sample cables
- Automatic output impedance and range control
- Auto-Zero / Auto range
- 2.4 inch TFT Colour Screen
- High accuracy and fast reflection
- Auto-Sensitivity allows for closer matching to a wide range of cable under test, only V.O.P. settings required
SKU: MT900 -
Cable & Circuit Testers
Cable Locator
- CAT III 300V and CAT II 600V
- The transmitter measures External voltage Range from 12V to 400V AC/DC
- Transmitter Output Signal 125 kHz
- Transmitter External Voltage Dielectric Strength Max 400V AC/DC
- Receiver Cable Locating Mode Single Pole 2 Meter
- Receiver Cable Locating Mode Dual Pole 0.5 Meter
- Receiver Cable Locating Single Loop Line up to 2.5 Meter
- Detects cables, electrical wire, water/gas supply pipelines concealed in walls and ground
- Detects interruptions and short circuits in cables and concealed electrical wire
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- The screen of transmitter displays present transmitting power, transmitted codes and voltage
- Transmitter has self-inspection displaying status on LCD
- Both transmitter and receiver have flashlight function
- Output signal 125kHz
- Detects interruptions and short circuits in floor heating
- The LCD of receiver displays present transmitting power, transmitted codes and voltage
- The sensitivity of the receiver can be adjusted manually or automatically
- The receiver can sweep frequency automatically
- Identifies fuses and assigned current circuits
- Mute mode can be set for both the transmitter and receiver
- Auto Power Off
- Additional transmitters are available to extend or verify several functions
SKU: MT195
