The MT400 600V AC NCV Detector quickly checks for the presence of live wires before performing any electrical testing. Suitable for outlets or against wire insulation testing, this AC Voltage Detector for non-contact detection of AC Voltage from 50 to 600V (50/60Hz). The Red LED in the tip indicates the presence of voltage.
Voltage Detectors
600V AC NCV Detector
Price:
$19.00 ex. GST
$20.90 inc. GST
- CAT III 600V and CAT II 1000V
- AC Voltage 600V
- Frequency 60Hz
- Indicates if voltage is present at plug sockets and light switches
- Ideal for industrial uses such as checking voltage on earth leakages, breakers, fuses and contactors
- Ideal for checking breaks in wires and cables
- Ideal for checking that plug sockets and light switches are earthed
- Indicates exactly where the “LIVE” phase has broken
Specifications
| Function | Range |
| Non-Contact Voltage (NCV) | Yes |
| AC Voltage | 50V to 600V |
| Frequency | 50/60Hz |
| Voltage Detector Visual | Red LED |
| Enclosure | Moulded |
| Batteries | 2 x AAA |
| Weight | 48g |
| Dimensions | 158 x 21 x 25mm |
| Safety Specs | IEC61010-1 CAT III 600V |
Safety Ratings
Accessories
2 x AAA Batteries
Instruction Manual
Related products
-
Voltage Detectors
44kV High Voltage Phasing Stick
- Dual colour coded scales for % and AC Voltage
- Neon indicator when voltage greater than 1200VAC is detected
- System Voltage 44kV
- Full Scale Voltage 48kV
- Maximum Voltage 55kV
- Frequency 50-60Hz
- Total Resistance 26.8Mꭥ
- Measures Phase to Phase
- Measures and tests Phase to Earth
- Compare between Phases
- High immunity to interference fields
- Current is limited to 1mA
- Lightweight, robust and compact
- Self-powered, no battery required
- Testing of grounded or ungrounded systems
- High quality fibreglass wound rod
- Suitable for indoor and outdoor use
SKU: MT44KV -
Voltage Detectors
11kV High Voltage Phasing Stick
- Dual colour coded scales for % and AC Voltage
- Neon indicator when voltage greater than 1200VAC is detected
- System Voltage 11kV
- Full Scale Voltage 12kV
- Maximum Voltage 15kV
- Frequency 50-60Hz
- Total Resistance 6.78Mꭥ
- Measures Phase to Phase
- Measures and tests Phase to Earth
- Compare between Phases
- High immunity to interference fields
- Current is limited to 1mA
- Lightweight, robust and compact
- Self-powered, no battery required
- Testing of grounded or ungrounded systems
- High quality fibreglass wound rod
- Suitable for indoor and outdoor use
- Meets IEC 61481
SKU: MT11KV -
Voltage Detectors
Intrinsically Safe IP67 NCV Detector
- Certified in accordance with the ATEX directive EX II 2 G Ex ib op IIB T4 Gb CAT IV 1000V
- IP67 waterproof and dust proof
- Intrinsically Safe
- AC Voltage 1000V
- Thinner probe tip for working with socket outlets
- Green LED means Power on, flashing red LED with beeper means Voltage detected
- Two modes, green indicates high voltage mode, Yellow LED 12V Mode
- Flash and beep rate increases as the detector gets closer to the voltage.
- Power On/Off with silent mode
- 2m drop-proof
- Build-in Flashlight
SKU: MT405EX -
Voltage Detectors
High Voltage NCV Detector
- Check and detect live high voltage cables
- Non-contact detection of live voltage
- AC Voltage 50V-1.5kV/1.5kV-132kV
- Two ranges of selection : High / Low
- Power consumption :20mA
- High & Low voltage detection mode
- Light weight, robust and compact
- Duty Cycle continuous
SKU: MT273
